Fragmented stack
Run chargers, batteries, solar and building loads from different vendors as one site.
The problem
Every asset runs on its own logic
A typical site mixes charger brands, a battery from another manufacturer, solar on the roof and a building on the same connection. Each comes with its own controller, protocol and interface.
Fragmented infrastructure
Tell us what's on your site. We'll check how it fits together.
Locked into one vendor
Coordination often only works inside one brand's ecosystem, which narrows every future hardware decision.
Every integration is a project
Different protocols per device turn each new asset into custom work.
How we solve it
One battery, several jobs
HARMON-E runs every job in one control logic, in a fixed order: the grid limits and DSO signals first then charging, then savings or market revenue.
Each job only uses the capacity the one before it doesn't need.
01.
Connect across vendors
Assets connect through standard protocols: OCPP for chargers, Modbus and MQTT for batteries, meters and solar. Modbus devices come from a validated list, so integrations are tested rather than improvised.
02.
Coordinate them as one site
Orchestrate your EV charging in a holistic optimisation concept with additional energy assets like solar power and stationary batteries. Combine our optimisation algorithms with dynamic tariffs for the final touch.
03.
Keep it running locally
Where a site needs it, the control logic runs on a GATEWAY or FLEXBOX, so coordination continues during an internet outage.
Capabilities
What makes it work
OCPP broker
HARMON-E's broker enables smooth OCPP communication, streamlining operations with batch management of charging stations. A single Websocket URL simplifies configuration and ensures consistent performance across all chargers.
Standard Asset Connection
Chargers, batteries, solar, meters and residual loads via OCPP, Modbus or MQTT.
Local control
More features behind the solution
Data Broker
Shares live asset data with your CPMS and other services
Multi-Level Clustering and Virtual Power Meter
Model complex sites
Multi-battery control
Lorem
Works with the hardware you already run
Chargers over OCPP, batteries and meters over Modbus and MQTT. See which models are certified
Typical sites
A site with chargers from two or more brands
One load picture and one set of rules for all of them.
Charging next to a building with rooftop solar
Charging uses solar first and fits around the building's demand.
Adding a battery from a different vendor
Bring it into the same control logic as the chargers already on site.
Proof
Operators running it today
Go deeper
Learn more about load management
Questions operators ask
Do all my chargers need to be from one brand?
No. HARMON-E works across brands over OCPP, Modbus and MQTT. We confirm the specific models before go-live.
Does this replace my CPMS?
No. HARMON-E handles energy and load; your CPMS keeps billing and driver services.






